Click image to view full size image
Lectrical Measuring and Control Instruments, Transducer Test, Gf302 Portable Multifunction Instrument Calibrator
Application
It is suitable for power plant and power grid companies measuring and testing department and instrumentation classes, and national levels measuring and testing institutions, railway, petroleum, chemical industry and other large industrial and mining enterprises, scientific research units, etc.
Functions and Features
All kinds of electric measurement transducer can be checked, including: AC/DC voltage transducer, AC/DC current transducer, frequency transducer, phase transducer, single/ three-phase AC active power transducer, 3-phase reactive power transducers;
Check all kinds of electric measurement indicating meter, including: AC/DC voltmeter, AC/DC ammeter, frequency meter, phase meter, single three-phase ac active power meter, three-phase ac reactive power meter, synchronous meter, etc.;
To test single-phase, three-phase electronic, mechanical watt-hour meter or energy meter/ kWh meter error;
To calibrate AC sample device, RTU, measurement device error;
The built-in electric measurement transducer, electric measurement instrument and meter instructions of verification procedures, can fully automatic or semi-automatic for verification, can save 1000 group check data;
As a voltage source, a current source and power source for high precision, and it is high stability standard resource;
8'-inch big screen color display; the system is WINDOW XP or embedded system; English interface.
The software calibration, it does not need to open the case, stable and reliable;
Voltage output terminal with short circuit, current output terminal open protection and power amplifier overheating protection function;
With automatic failure detection function, shows fault part, the convenience users check line;
With RS232 interface, it can connect computer for data management.
Technical Data
AC voltage output
Range: 50 V, 100 V, 200 V, 400 V, 600 V;
Adjusting range: (0-120) % RG
Adjust fineness: 0.01% RG
Accuracy: 0.05% RG
Stability: 0.01% / 1 min
Load capacity: 25 VA
Output distortion degree: ≤0.3% or (linear load)
AC current output
Range: 0.5A, 1A, 2.5A, 5A, 10A, 20A;
Adjusting range: (0-120) % RG
Adjust fineness: 0.01% RG
Accuracy: 0.05% RG
Stability: 0.01% / 1 min
Load capacity: 25 VA
Output distortion degree: ≤0.3% or (linear load)
AC power output
Accuracy: 0.05% RG
Stability: 0.01% / 1 min
Frequency
Frequency range: 45.000 ~ 65.000 Hz
Resolution: 0.001 Hz
Accuracy: 0.01 Hz
Power factor output
Adjusting range: -1~0~1
Adjust fineness: 0.0001
Accuracy: 0.0005
Phase angle
Scope: 0.00 ° ~ 359.99 °
Resolution: 0.01 °
Accuracy: 0.05 °
Voltage/Current harmonic output
2~31st
DC voltage output
Range: 75 V, 150 V, 300 V, 500 V , 1000 V
Adjusting range: (0-120) % RG
Adjust fineness: 0.005% RG
Accuracy: 0.05% RG
Stability: 0.01% / 1 min
Load capacity: 25 VA
Application
It is suitable for power plant and power grid companies measuring and testing department and instrumentation classes, and national levels measuring and testing institutions, railway, petroleum, chemical industry and other large industrial and mining enterprises, scientific research units, etc.
Functions and Features
All kinds of electric measurement transducer can be checked, including: AC/DC voltage transducer, AC/DC current transducer, frequency transducer, phase transducer, single/ three-phase AC active power transducer, 3-phase reactive power transducers;
Check all kinds of electric measurement indicating meter, including: AC/DC voltmeter, AC/DC ammeter, frequency meter, phase meter, single three-phase ac active power meter, three-phase ac reactive power meter, synchronous meter, etc.;
To test single-phase, three-phase electronic, mechanical watt-hour meter or energy meter/ kWh meter error;
To calibrate AC sample device, RTU, measurement device error;
The built-in electric measurement transducer, electric measurement instrument and meter instructions of verification procedures, can fully automatic or semi-automatic for verification, can save 1000 group check data;
As a voltage source, a current source and power source for high precision, and it is high stability standard resource;
8'-inch big screen color display; the system is WINDOW XP or embedded system; English interface.
The software calibration, it does not need to open the case, stable and reliable;
Voltage output terminal with short circuit, current output terminal open protection and power amplifier overheating protection function;
With automatic failure detection function, shows fault part, the convenience users check line;
With RS232 interface, it can connect computer for data management.
Technical Data
AC voltage output
Range: 50 V, 100 V, 200 V, 400 V, 600 V;
Adjusting range: (0-120) % RG
Adjust fineness: 0.01% RG
Accuracy: 0.05% RG
Stability: 0.01% / 1 min
Load capacity: 25 VA
Output distortion degree: ≤0.3% or (linear load)
AC current output
Range: 0.5A, 1A, 2.5A, 5A, 10A, 20A;
Adjusting range: (0-120) % RG
Adjust fineness: 0.01% RG
Accuracy: 0.05% RG
Stability: 0.01% / 1 min
Load capacity: 25 VA
Output distortion degree: ≤0.3% or (linear load)
AC power output
Accuracy: 0.05% RG
Stability: 0.01% / 1 min
Frequency
Frequency range: 45.000 ~ 65.000 Hz
Resolution: 0.001 Hz
Accuracy: 0.01 Hz
Power factor output
Adjusting range: -1~0~1
Adjust fineness: 0.0001
Accuracy: 0.0005
Phase angle
Scope: 0.00 ° ~ 359.99 °
Resolution: 0.01 °
Accuracy: 0.05 °
Voltage/Current harmonic output
2~31st
DC voltage output
Range: 75 V, 150 V, 300 V, 500 V , 1000 V
Adjusting range: (0-120) % RG
Adjust fineness: 0.005% RG
Accuracy: 0.05% RG
Stability: 0.01% / 1 min
Load capacity: 25 VA
| ITEM | SPECIFICATIONS |
| AC CURRENT | 0~24A |
| AC VOLTAGE | 0~800V |
| DC CURRENT | 0~24A |
| DC VOLTAGE | 0~1000V |
| ACCURACY | 0.05% |
| PHASE ANGLE | 0~360.00 |
| PF | -1~0~1 |
| F | 45~65Hz |
| DCmeasurement | 0~±24mA; 0~±24V ; accuracy 0.02% |